3355966
Plain Hose
Cummins®

Introduction

The Cummins 3355966 Plain Hose is a component designed for use in commercial trucks. It serves a specific function within the truck’s fluid systems, contributing to the overall efficiency and reliability of the vehicle. Understanding its purpose and significance is key to maintaining the truck’s performance and longevity.

Basic Concepts of Plain Hoses

Plain hoses are flexible tubes used to transport fluids within various systems. They are characterized by their simplicity, lacking reinforcements such as wire or fabric that are found in other types of hoses. This design allows for flexibility and ease of installation, making them suitable for a wide range of applications. Unlike reinforced hoses, plain hoses are typically used in less demanding environments where high pressure or extreme conditions are not a concern ¹.

Purpose of the 3355966 Plain Hose

This Cummins part plays a role in the fluid systems of commercial trucks by transporting fluids between components. It is part of systems that require the movement of fluids under moderate pressure and temperature conditions. The hose facilitates the flow of fluids, ensuring that systems operate smoothly and efficiently.

Key Features

The Cummins 3355966 Plain Hose is constructed from materials that provide durability and flexibility. Its design includes features that enhance performance, such as smooth inner and outer surfaces that reduce flow resistance and the potential for clogs. The hose is also designed to withstand the typical operating conditions found in commercial truck applications, ensuring reliable performance over time ².

Benefits

Using the Cummins 3355966 Plain Hose offers several advantages. Its design contributes to improved system efficiency by ensuring smooth fluid flow. The hose’s durability and reliability reduce the need for frequent replacements, leading to cost savings and reduced maintenance efforts. Additionally, its longevity ensures that it can withstand the demands of commercial truck operations, providing consistent performance ³.

Installation Considerations

Proper installation of this Cummins part is important for ensuring its effectiveness and longevity. Guidelines for installation include ensuring that the hose is correctly sized for the application, using appropriate fittings, and securing the hose in place to prevent movement that could lead to wear or damage. Tools and techniques may vary depending on the specific application, but careful attention to detail during installation is crucial for optimal performance ⁴.

Maintenance and Troubleshooting

Maintaining the Cummins 3355966 Plain Hose involves regular inspections to check for signs of wear, damage, or leaks. Common issues that may arise include hose deterioration due to exposure to harsh chemicals or physical damage from moving parts. Troubleshooting steps may include replacing worn sections of the hose or adjusting fittings to ensure a secure connection. Regular maintenance helps to prevent unexpected failures and ensures the hose continues to perform its intended function.

Compatibility and Usage

This Cummins part is designed for use in specific applications within commercial trucks. It is important to ensure that the hose is compatible with the systems it will be a part of, including checking for proper fit, pressure ratings, and fluid compatibility. Using the hose in the appropriate contexts ensures that it functions as intended and contributes to the overall performance of the truck.

Safety Considerations

When working with the Cummins 3355966 Plain Hose, it is important to observe safety guidelines and precautions. This includes wearing appropriate personal protective equipment, ensuring that the work area is well-ventilated if working with fluids that may emit harmful fumes, and following proper handling and disposal procedures for any fluids or materials. Adhering to these safety considerations helps to protect both the individual and the environment.

Cummins Overview

Cummins Inc. is a global power leader that designs, manufactures, and distributes engines, filtration, and power generation products. With a history spanning over a century, Cummins has established itself as a trusted name in the industry, known for its commitment to quality and innovation. The company’s extensive product line includes diesel engines and related technologies, making it a key player in the commercial truck and heavy-duty equipment sectors. The production of the Cummins 3355966 Plain Hose is part of Cummins’ broader effort to provide reliable and efficient components for the vehicles and equipment it powers.

Cummins Engine Compatibility with Part 3355966

The Plain Hose part 3355966, manufactured by Cummins, is designed to fit into various engine configurations. This hose is integral for maintaining fluid flow and pressure within the engine systems, ensuring optimal performance and reliability.

Cummins 4B3.9 and 6B5.9 Engines

The Plain Hose part 3355966 is compatible with the Cummins 4B3.9 and 6B5.9 engines. These engines are known for their robust design and efficiency, often used in heavy-duty applications. The hose ensures that the fluid pathways remain unobstructed, which is crucial for the engine’s cooling and lubrication systems.

Cummins 6C8.3 and B5.9 GAS PLUS CM556 Engines

For the Cummins 6C8.3 and B5.9 GAS PLUS CM556 engines, the Plain Hose part 3355966 is also a suitable fit. These engines are typically employed in agricultural and construction machinery, where durability and performance are paramount. The hose’s compatibility with these engines ensures that the fluid systems function seamlessly, contributing to the longevity and efficiency of the engines.

Cummins ISB CM550 and ISB5.9 CM2880 Engines

The Plain Hose part 3355966 is also compatible with the Cummins ISB CM550 and ISB5.9 CM2880 engines. These engines are widely used in various industries, including transportation and power generation. The hose’s design ensures that it can handle the specific fluid flow requirements of these engines, maintaining the necessary pressure and flow rates for optimal engine operation.

Cummins ISB5.9 CM2880 B110 and ISB5.9 CM2880 B140 Engines

For the Cummins ISB5.9 CM2880 B110 and ISB5.9 CM2880 B140 engines, the Plain Hose part 3355966 is also a fitting component. These engines are often used in heavy-duty applications, where reliability and performance are critical. The hose’s compatibility with these engines ensures that the fluid systems operate efficiently, contributing to the overall performance and longevity of the engines.

Cummins ISB5.9G CM2180 and QSB5.9 44 CM550 Engines

Lastly, the Plain Hose part 3355966 is also compatible with the Cummins ISB5.9G CM2180 and QSB5.9 44 CM550 engines. These engines are used in a variety of applications, from construction to power generation. The hose’s design ensures that it can handle the specific fluid flow requirements of these engines, maintaining the necessary pressure and flow rates for optimal engine operation.

Role of Part 3355966 Plain Hose in Engine Systems

The part 3355966 Plain Hose is an essential component in various engine systems, facilitating the smooth operation of several key functions.

In the arrangement of engine components, the plain hose ensures that fluids are directed accurately and efficiently between different parts. This is particularly important in maintaining the structural integrity and performance of the engine, as it prevents leaks and ensures that all components receive the necessary fluids at the correct pressure and temperature.

Within the compressor coolant system, the plain hose plays a significant role in managing the flow of coolant. The coolant is vital for regulating the temperature of the compressor, which operates under high stress and heat. The plain hose ensures that the coolant reaches all necessary points within the compressor, helping to maintain optimal operating temperatures and prolonging the lifespan of the compressor.

In the broader context of plumbing within the engine system, the plain hose is a fundamental element. It connects various subsystems, allowing for the transfer of fluids such as oil, coolant, and other necessary liquids. This interconnection is vital for the lubrication, cooling, and overall functionality of the engine. The plain hose must be durable and reliable to withstand the pressures and temperatures involved in these processes.

Additionally, the plain hose is integral to the compressor coolant plumbing. It ensures that the coolant is circulated effectively throughout the compressor system, preventing overheating and ensuring that the compressor can operate efficiently. This is particularly important in high-performance engines where the compressor is subjected to extreme conditions.

Overall, the part 3355966 Plain Hose is a key component in ensuring the reliable and efficient operation of engine systems, particularly in managing fluid dynamics and temperature regulation.

Conclusion

The Cummins 3355966 Plain Hose is a critical component in the fluid systems of commercial trucks, designed to ensure efficient and reliable fluid transport. Its compatibility with various Cummins engines highlights its versatility and importance in maintaining engine performance. Proper installation, maintenance, and adherence to safety guidelines are essential for maximizing the benefits of this Cummins part, contributing to the overall efficiency and longevity of commercial truck operations.