4099173
Pressure Sensor
Cummins®

Introduction

The Cummins 4099173 Pressure Sensor is a critical component in commercial truck operations, designed to monitor and report pressure levels within the truck’s systems. This sensor is part of Cummins Inc.’s range of automotive parts, known for their reliability and performance in demanding environments ¹.

Basic Concepts of Pressure Sensors

Pressure sensors measure the force exerted by a fluid per unit area within a system, converting this physical pressure into an electrical signal for interpretation by the vehicle’s electronic systems ². In automotive applications, they are used in various systems, including engine management, brake systems, and fuel delivery, to ensure optimal performance and safety.

Role of the 4099173 Pressure Sensor in Truck Operation

The Cummins 4099173 Pressure Sensor is integrated into the truck’s systems to monitor specific pressure points. It provides real-time data to the truck’s electronic control unit (ECU), which uses this information to adjust engine parameters, ensuring efficient operation. The sensor’s role is to maintain the correct pressure levels, which is essential for the performance and longevity of the truck’s components ³.

Key Features of the 4099173 Pressure Sensor

The Cummins 4099173 Pressure Sensor is characterized by its robust design and high-quality materials, contributing to its durability and accuracy. It is engineered to withstand the harsh conditions typical of commercial truck environments. The sensor’s technological specifications, including its sensitivity and response time, are tailored to meet the demanding requirements of heavy-duty truck applications.

Benefits of Using the 4099173 Pressure Sensor

Incorporating the Cummins 4099173 Pressure Sensor into a truck’s system offers several advantages. It contributes to improved engine performance by ensuring that pressure levels are maintained within optimal ranges, leading to more efficient fuel consumption and reduced emissions. Additionally, the sensor enhances safety by providing accurate pressure readings that allow for timely adjustments and interventions by the truck’s systems.

Installation and Integration

Proper installation of the Cummins 4099173 Pressure Sensor is crucial for its effective operation. It should be installed according to the manufacturer’s guidelines, ensuring that it is securely fitted and correctly aligned with the truck’s systems. Integration into the truck’s electronic system requires careful attention to wiring and connections to ensure accurate data transmission.

Maintenance and Troubleshooting

Regular maintenance of the Cummins 4099173 Pressure Sensor is important for its longevity and performance. This includes checking for physical damage, ensuring connections are secure, and verifying that the sensor is functioning within specified parameters. Troubleshooting common issues may involve checking for electrical faults, ensuring the sensor is clean and free from obstructions, and verifying that it is correctly calibrated.

Compatibility with Various Engine Models

The Cummins Pressure Sensor part number 4099173 is designed to be compatible with a range of engine models, ensuring reliable performance and accurate readings across different applications. This sensor is integral to maintaining optimal engine operation by monitoring pressure levels within the engine’s systems.

K38 and K50 Engines

For the K38 and K50 engines, the 4099173 Pressure Sensor plays a significant role in the engine’s management system. These engines, known for their robust design and efficiency, benefit from the precise pressure readings provided by this sensor. It helps in maintaining the balance of fuel injection and air intake, which is vital for the engines’ performance and longevity.

QSK19 and MCRS Engines

In the QSK19 and MCRS engines, the 4099173 Pressure Sensor is equally important. These engines, often used in demanding applications such as marine and heavy-duty operations, require accurate pressure monitoring to ensure peak performance and reliability. The sensor’s integration into these engines helps in detecting any anomalies in pressure levels, which can be critical in preventing potential engine failures.

QSM11 and CM570 Engines

The QSM11 and CM570 engines also utilize the 4099173 Pressure Sensor to maintain optimal operating conditions. These engines, typically found in agricultural and construction equipment, depend on the sensor’s ability to provide real-time pressure data. This data is essential for the engine control unit to make necessary adjustments, ensuring efficient operation and reducing the risk of wear and tear.

Compatibility and Performance

The 4099173 Pressure Sensor’s compatibility with these diverse engine models highlights its versatility and reliability. Cummins has engineered this sensor to meet the stringent demands of various engine types, ensuring that it provides consistent and accurate pressure readings. This compatibility is a testament to Cummins’ commitment to quality and performance in their engine components.

Role of the 4099173 Pressure Sensor in Engine Systems

The 4099173 Pressure Sensor is integral to the operation and monitoring of various engine systems. It is meticulously designed to provide accurate pressure readings, which are essential for the proper functioning of the engine.

Integration with Engine Instrument and Monitoring Systems

When installed on the sensor bracket, the 4099173 Pressure Sensor feeds real-time pressure data to the engine instrument system. This data is vital for the engine monitoring system, allowing it to make adjustments to ensure optimal performance and efficiency. The sensor’s readings help in maintaining the correct pressure levels within the engine, which is fundamental for combustion efficiency and overall engine health.

Contribution to Alarm and Notification Systems

The pressure data collected by the 4099173 Pressure Sensor is also routed to the alarm system. Should the pressure levels deviate from the predetermined safe range, the sensor triggers an alert. This prompt notification allows for immediate action to be taken, preventing potential engine damage and ensuring safety.

Role in Product Installation and Panel Integration

During the product installation phase, the 4099173 Pressure Sensor is carefully positioned to ensure it can accurately measure pressure at key points within the engine system. Its integration with the panel allows for easy monitoring and adjustment of pressure levels, providing engineers and mechanics with a user-friendly interface to manage engine performance.

Enhancing System Reliability and Performance

The 4099173 Pressure Sensor plays a significant role in enhancing the reliability and performance of the engine system. By providing consistent and accurate pressure readings, it enables the engine monitoring system to make precise adjustments, leading to improved fuel efficiency, reduced emissions, and extended engine lifespan.

Conclusion

The Cummins 4099173 Pressure Sensor is a key component in the engine system, contributing to its efficient operation, safety, and longevity. Its accurate pressure readings are essential for the engine instrument and monitoring systems, alarm notifications, and overall system reliability.