4095528
Mounting Spacer
Cummins®

Introduction

The Cummins 4095528 Mounting Spacer is a critical component designed for heavy-duty truck applications. It ensures proper alignment and spacing between various components within the truck’s assembly, contributing to the structural integrity and operational efficiency of the truck’s systems.

Purpose and Function

This part serves a specific function in truck assemblies by providing the necessary distance and alignment between components. It ensures that parts are correctly positioned relative to each other, which is vital for the smooth operation of the truck. By maintaining proper spacing, the mounting spacer helps in reducing wear and tear on connected parts, thereby enhancing the overall durability and performance of the truck ¹.

Key Features

The Cummins 4095528 Mounting Spacer is characterized by several key features that contribute to its effectiveness. It is made from high-quality materials, ensuring durability and resistance to the harsh conditions often encountered in heavy-duty applications. The spacer is designed with precise dimensions to fit specific applications, guaranteeing accurate alignment. Additionally, its design incorporates features that enhance performance, such as smooth surfaces to reduce friction and potential points of failure ².

Benefits

Utilizing the Cummins 4095528 Mounting Spacer offers several advantages. It improves component alignment, which is crucial for the efficient operation of the truck. Reduced vibration is another benefit, as proper spacing minimizes the movement between components. This leads to a more stable and reliable system. Furthermore, the spacer contributes to enhanced overall system efficiency by ensuring that all parts work in harmony ³.

Installation Guidelines

Proper installation of the Cummins 4095528 Mounting Spacer is crucial for its effective function. Begin by ensuring that the area where the spacer will be installed is clean and free of debris. Use the appropriate tools to place the spacer in its designated position, ensuring it is aligned correctly with the components it connects. Follow the manufacturer’s guidelines for tightening any fasteners to the specified torque, which ensures the spacer is securely in place without over-tightening, which could damage the spacer or the components it connects.

Maintenance and Troubleshooting

To ensure the longevity and performance of the Cummins 4095528 Mounting Spacer, regular maintenance is recommended. Inspect the spacer during routine checks for any signs of wear, damage, or misalignment. Cleaning the spacer and its surrounding area can prevent the buildup of dirt and debris, which could affect its function. If issues arise, such as increased vibration or misalignment, it may be necessary to re-evaluate the installation or consider replacing the spacer if it is damaged.

Compatibility and Applications

The Cummins 4095528 Mounting Spacer is designed to be compatible with a range of truck models and engine types. Its applications extend to various truck systems and components, where precise alignment and spacing are required. This versatility makes it a valuable component in maintaining the performance and reliability of heavy-duty trucks.

Manufacturer Information

Cummins Inc. is a renowned manufacturer in the automotive industry, known for its commitment to producing high-quality components for commercial vehicles. With a rich history and a strong reputation, Cummins Inc. continues to innovate and provide reliable solutions for the demanding requirements of heavy-duty applications. The company’s dedication to quality and performance is evident in its wide range of products, including the Cummins 4095528 Mounting Spacer.

Cummins Engine Mounting Spacer 4095528

The Cummins Mounting Spacer part number 4095528 is a critical component in the assembly and operation of several Cummins engines. This part is designed to ensure precise alignment and stability of engine components, contributing to the overall performance and longevity of the engine.

Application in Cummins Engines

B3.3 Engine Series

The B3.3 engine series benefits from the mounting spacer 4095528, which plays a crucial role in maintaining the integrity of the engine’s mounting system. This part ensures that the engine is securely fastened to the vehicle or machinery, reducing vibrations and wear on other components.

QSB3.3 CM2150 Engine

In the QSB3.3 CM2150 engine, the mounting spacer 4095528 is integral to the engine’s mounting architecture. This engine, known for its robust performance, relies on the precise fit and function of the mounting spacer to maintain alignment and stability under various operating conditions. The spacer’s role in this engine is particularly important given the demanding applications for which the QSB3.3 CM2150 is designed.

Importance of the Mounting Spacer

The mounting spacer 4095528 is essential for several reasons:

• Alignment: It ensures that the engine is correctly aligned with other components, which is vital for smooth operation and to prevent premature wear.
• Stability: By providing a stable mounting point, it helps to minimize engine movement, reducing stress on the engine and connected parts.
• Vibration Control: Proper mounting reduces vibrations, which can otherwise lead to fatigue and failure of engine components over time.

Installation and Maintenance

When installing the mounting spacer 4095528, it is crucial to follow the manufacturer’s guidelines to ensure that it is correctly positioned and tightened. Regular maintenance checks should be performed to verify that the spacer remains in good condition and continues to perform its function effectively. Any signs of wear or damage should be addressed promptly to avoid potential engine issues.

Role of Part 4095528 Mounting Spacer in Engine Systems

The 4095528 Mounting Spacer is an essential component in the assembly and integration of various engine systems. It facilitates the proper alignment and secure fitting of multiple components, ensuring optimal performance and durability.

Integration with the Cooler and Engine Oil Systems

In the cooler and engine oil systems, the 4095528 Mounting Spacer ensures that the cooler is correctly positioned relative to the engine block. This precise alignment is vital for efficient heat exchange, which is necessary for maintaining optimal engine oil temperature. The spacer helps in maintaining the correct distance between the cooler and other components, preventing any potential interference that could lead to reduced efficiency or damage.

Supporting the Harness and Electronic Control Module Wiring

When it comes to the harness and electronic control module (ECM) wiring, the 4095528 Mounting Spacer plays a significant role in organizing and securing the wiring. It ensures that the harness is held in place without any undue stress or strain, which could otherwise lead to wire fatigue or failure. This is particularly important in high-vibration environments typical of engine compartments.

Plumbing System Compatibility

In the context of the plumbing system, the 4095528 Mounting Spacer assists in the accurate placement of pipes and fittings. It ensures that there is adequate clearance for all plumbing components, reducing the risk of leaks or obstructions. This is essential for maintaining the integrity of the fluid pathways within the engine system.

Turbocharger and Turbocharger Kit Assembly

For the turbocharger and turbocharger kit, the 4095528 Mounting Spacer is instrumental in achieving the correct mounting position. It ensures that the turbocharger is aligned properly with the engine, which is necessary for efficient airflow and turbo response. The spacer also helps in distributing the load evenly, which is important for the longevity of the turbocharger and its associated components.

Conclusion

The Cummins 4095528 Mounting Spacer is a versatile component that enhances the integration and functionality of various engine systems. Its role in maintaining proper alignment, securing components, and ensuring efficient operation cannot be overstated. Proper installation, regular maintenance, and understanding its applications are key to leveraging the full benefits of this Cummins part.