4916262
Mounting Spacer
Cummins®

Introduction

The Cummins 4916262 Mounting Spacer is a component designed for use in heavy-duty truck applications. Its primary role is to ensure proper alignment and spacing between various truck components, contributing to the overall efficiency and reliability of the vehicle.

Purpose and Function

The Cummins 4916262 Mounting Spacer serves to facilitate accurate alignment and appropriate spacing between components in truck assemblies. By maintaining the correct distance and orientation, it helps in reducing stress on connected parts, ensuring smooth operation, and enhancing the longevity of the assembly ¹.

Key Features

The Cummins 4916262 Mounting Spacer is constructed from high-quality materials, ensuring durability and resistance to wear. Its dimensions are precisely engineered to fit specific applications, and its design includes features that enhance performance, such as smooth surfaces to reduce friction and robust construction to withstand heavy loads ².

Benefits

Using the Cummins 4916262 Mounting Spacer offers several advantages. It improves the alignment of components, which can lead to reduced vibration during operation. Additionally, its durable construction enhances the overall durability of the truck assembly, and its design allows for easier maintenance and replacement when necessary ³.

Installation Process

Installing the Cummins 4916262 Mounting Spacer requires careful attention to detail. Begin by ensuring the area is clean and free of debris. Use the appropriate tools to remove the old spacer, if applicable, and inspect the mating surfaces for any damage. Place the new spacer in position, ensuring it is aligned correctly with the surrounding components. Secure it in place according to the manufacturer’s instructions, and perform alignment checks to confirm proper installation.

Common Issues and Troubleshooting

Common issues with mounting spacers may include misalignment or wear over time. To address misalignment, recheck the installation process to ensure all steps were followed correctly. If wear is detected, assess the condition of the spacer and consider replacement if necessary. Regular inspections can help identify potential issues before they lead to more significant problems.

Maintenance Tips

To maintain the Cummins 4916262 Mounting Spacer, conduct regular inspections to check for signs of wear or damage. Clean the spacer and surrounding areas to prevent the buildup of dirt and debris, which can affect performance. If significant wear is observed, or if the spacer shows signs of damage, consider replacement to ensure continued reliable operation.

Compatibility and Applications

The Cummins 4916262 Mounting Spacer is designed for use in various heavy-duty truck configurations. Its versatility allows it to be compatible with a range of truck models, making it a valuable component for fleet managers and maintenance professionals.

Manufacturer Information - Cummins

Cummins Inc. is a renowned manufacturer in the automotive industry, known for its high-quality components and commitment to innovation. With a rich history of producing reliable and efficient parts, Cummins continues to be a trusted name among professionals in the field.

Cummins Engine Part 4916262: Mounting Spacer

The Cummins part number 4916262, identified as a Mounting Spacer, is a critical component in the assembly and operation of certain Cummins engines. This part is designed to ensure precise alignment and secure mounting of various engine components, contributing to the overall stability and performance of the engine.

Application in KTA19GC Engines

In the KTA19GC engines, the Mounting Spacer 4916262 plays a vital role in maintaining the integrity of the engine’s structure. It is used to properly position and secure specific components, ensuring that they operate within the manufacturer’s specifications. This helps in preventing misalignment, which could lead to increased wear and potential engine failure.

Application in KTA19GC CM558 Engines

Similarly, in the KTA19GC CM558 engines, the Mounting Spacer 4916262 is integral to the engine’s assembly. This particular variant of the KTA19GC engine may have additional or slightly different mounting requirements due to its specific configuration or enhancements. The spacer ensures that all components are correctly aligned and securely fastened, contributing to the engine’s reliability and efficiency.

Importance of the Mounting Spacer

The correct installation of the Mounting Spacer 4916262 is crucial for the longevity and performance of the engine. It helps in maintaining the precise spacing between components, which is essential for the smooth operation of the engine. Any deviation in the positioning of these components can lead to increased friction, noise, and ultimately, a reduction in the engine’s lifespan.

By ensuring that all parts are correctly mounted, the spacer helps in reducing the risk of mechanical failure and enhances the overall efficiency of the engine. This is particularly important in high-performance or industrial engines, where reliability and durability are paramount.

Role of Part 4916262 Mounting Spacer in Engine Systems

The Part 4916262 Mounting Spacer is an integral component in the assembly and functionality of various engine systems. It ensures precise spacing and alignment between components, which is essential for optimal performance and durability.

Aftercooler Integration

In systems equipped with an aftercooler, the Mounting Spacer facilitates the correct positioning of the aftercooler relative to other components. This ensures efficient cooling of the compressed air, which is vital for maintaining engine performance and longevity.

Air Crossover Mounting

For engines with an air crossover system, the Mounting Spacer plays a key role in securing the air crossover tube. It maintains the necessary gap between the tube and adjacent parts, ensuring smooth airflow and reducing the risk of vibrations that could lead to wear or damage.

Turbocharger Arrangement

In turbocharged engines, the Mounting Spacer is used to accurately position the turbocharger within the engine bay. This precise placement is essential for the turbocharger to operate efficiently, enhancing both power output and fuel efficiency.

Camshaft and Connection Points

The Mounting Spacer is also utilized in the arrangement of the camshaft and its connections. By providing the correct spacing, it ensures that the camshaft operates within its designed parameters, contributing to the engine’s overall performance and reliability.

Heat Shield Mounting

In systems where heat shields are employed, the Mounting Spacer helps in the secure attachment of these shields. This is important for managing heat distribution within the engine bay, protecting nearby components from excessive heat, and maintaining the engine’s operational integrity.

Air Intake Connection Mounting

For the air intake system, the Mounting Spacer ensures that the connections are properly spaced. This is important for maintaining an efficient airflow into the engine, which is crucial for combustion efficiency and overall engine performance.

Conclusion

In summary, the Cummins 4916262 Mounting Spacer is a fundamental component in various engine systems, ensuring that each part is correctly positioned and spaced. This not only enhances the engine’s performance but also contributes to its durability and reliability.